• <xmp id="oawmy"><source id="oawmy"></source>
  • <xmp id="oawmy"><source id="oawmy"></source>
  • <bdo id="oawmy"><wbr id="oawmy"></wbr></bdo>
  • <td id="oawmy"></td>
    產品詳細信息 更多+
    玻璃盤螺栓螺帽光學影像篩選機

    長按識別二維碼查看詳情

    長按圖片可保存到相冊

    圖片加載中,請稍等 ...
    長按圖片保存/分享
    玻璃盤螺栓螺帽光學影像篩選機
    玻璃盤螺栓螺帽光學影像篩選機
    瀏覽:
    詳情

    HL-60-LSLM

    參數規格:

    HL-60-LSLM

    玻璃盤螺栓螺帽光學影像篩選機

    Optical image screening machine for glass plate bolt and nut

    參數規格

    Specifications

    本機臺外觀尺寸(**)

    1200mm*1200mm*2200mm

    機臺重量:約750KG       

    更換規格:約10分鐘

    檢測范圍:

    長度:10-60mm;直徑3-25mm(可以倒立)

    可裝4CCD

    速度最快可達600/分鐘

    電源:交流單項220V  50HZ

    功率:約3KW

    roduct Size(L x W x H):

    About 1200mm*1200mm*2200mm

    Machine weight: about 750KG

    Replacement specification: about 10 min

    examination range:

    Length: 10-60mm; diameter 3-25mm (can be inverted)

    Can carry 4 CCD

    The fastest speed:600 / min

    Power: AC single 220V 50HZ

    Power: about 3KW

    可檢測項目

    Suitable for

    ○螺紋直徑公差檢測;○最大/最小對邊公差檢測;

    ○螺紋牙底徑檢測;○最大/最小對角公差檢測;

    ○螺紋牙中徑檢測;○內孔與外圓同心度檢測;

    ○牙距檢測;○內孔徑有無毛刺檢測;

    ○桿部有無螺紋檢測;○頭部有無電鍍檢測;

    ○斜牙檢測;○頭部表面開裂(側面開裂需增加專用鏡頭);

    ○粗細牙檢測;○內孔直徑公差;○尖銳度檢測;

    ○有無焊點,及焊點數檢測;○頭部真圓度測量;

    ○焊點面積檢測;○搓牙有無到位檢測;

    ○螺帽牙內有無鐵屑檢測;○各部位臺階公差檢測;

    ○梅花形狀及有無滾花檢測;○頭部厚度公差檢測;

    ○有無牙檢測;○總長度公差檢測;○牙數檢測;

    ○側面開裂檢測;○螺帽爛牙、壞牙檢測;

    Thread diameter tolerance detection; Maximum/Minimum alignment tolerance detection;Threaded teeth bottom diameter detection; Maximum/minimum diagonal tolerance detection;Thread middle diameter detection; Concentricity detection of inner hole and outer circle;Distance detection between teeth; Detection for burr in internal aperture or not;

    Thread or not of pole part or not; Electroplating on head or not;

    Oblique teeth detection; Head surface cracking

    Teeth thickness detection; Diameter tolerance of inner hole; Sharpness detection;

    Detection for solder joint or not and the number;

    Head roundness measurement;Solder joint area detection;

    Detection for rub teeth in place or not;

    Detection for iron chip in nut teeth or not;

    Step tolerance detection of each part;Detection of plum blossoms and annular knurl or not; Head thickness tolerance detection;

    Teeth detection; Total length tolerance detection; Teeth number detection;

    Teeth number detection;

    Side cracking detection; Detection for broken teeth and bad teeth of nut;




    @copyright 2019 華磊(嘉興)智能科技有限公司

    All rights reserved 浙ICP備19042112號-1

    添加微信好友,詳細了解產品
    使用企業微信
    “掃一掃”加入群聊
    復制成功
    添加微信好友,詳細了解產品
    我知道了
    2020狠狠狠狠久久免费观看
  • <xmp id="oawmy"><source id="oawmy"></source>
  • <xmp id="oawmy"><source id="oawmy"></source>
  • <bdo id="oawmy"><wbr id="oawmy"></wbr></bdo>
  • <td id="oawmy"></td>