懸掛插針式分度盤篩選機

Screening machine for hanging needle dividing plate

可檢測項目

Suitable for

○螺紋直徑公差檢；○頭部最大/最小對邊公差檢測；

○螺紋牙底徑檢測；○最大/最小對角公測；○斜牙檢測；

○螺紋牙中徑檢測；○內孔與外圓同心度檢測；○牙距檢測；

○內孔徑有無毛刺檢測；○頭部有無電鍍檢測；

○有無螺紋檢測；○頭部表面開裂(有油件、側面開裂除外)；

○粗細牙檢測；○內孔直徑公差；○尾端尖銳度檢測；

○有無焊點及焊點數檢測；○頭部真圓度測量；

○焊點面積檢測；○各部位臺階公差檢測；○梅花形狀檢測；

○頭部厚度公差檢測；○有無牙檢測；○牙部長度公差檢測；

○針孔堵塞檢測；○有無十字針孔；

○Thread diameter tolerance detection; ○Maximum / minimum alignment tolerance detection on head;

○Threaded teeth bottom diameter detection;○ Maximum/minimum diagonal tolerance detection; Oblique teeth detection;

○Thread middle diameter detection;○ Concentricity detection of inner hole and outer circle; ○Distance detection between teeth;

○Detection for burr in internal aperture or not;○ Electroplating on head or not;

○Thread or not; ○Head surface cracking (except for with oil parts and side cracking).

○Teeth thickness detection;○ Diameter tolerance of inner hole; ○Sharpness detection of end;

○Detection for solder joint or not and the number;○ Head roundness measurement;

○Solder joint area detection; Step tolerance detection of each part; ○Shape detection of plum blossoms;

○Head thickness tolerance detection; ○Teeth or not; Detection of tooth length tolerance;

○Pinhole blockage detection;○ Cross pinholes or not;

參數規格

Specifications

本機臺外觀尺寸(長*寬*高)：

約1000mm*1000mm*2300mm

機臺重量：約650KG

更換規格：約20分鐘

檢測范圍：

長度:30-100mm;直徑：3-12mm  

速度最快可達400支/分鐘

電源：交流單項220V  50HZ

可裝4支CCD

功率：約3KW

運轉方式：連續運轉方式

Product Size(L x W x H):

About 1000mm*1000mm*2300mm

Machine weight: about 650KG

Replacement specification: about 20 min

examination range:

Length: 30-100mm; Diameter: 3-12mm

The fastest speed:400pcs / min

Power: AC single 220V 50HZ

Can carry 4 CCD

Power: about 3KW

Mode of operation: mode of continuous operation