HL-05-ATWL-LS

光學影像、渦電流探傷組合篩選機

Combined screening machine of optical image and vortex current flaw detection

裂紋檢測精度：深度＞0.1mm 寬度0.06mm

Crack detection accuracy: depth＞0.1mm  width 0.06mm

參數規格

Specifications

本機臺外觀尺寸(長*寬*高)：

約2000mm*1200mm*2300mm

機臺重量：約850KG

更換規格：約30分鐘

檢測范圍：

長度:10-60mm 直徑：10-30mm

速度最快可達20支/分鐘

裂紋檢測精度：深度＞0.1mm 寬度0.06mm

電源：交流單項220V  50HZ

功率：約3KW

Product Size(L x W x H):

About 2000mm*1200mm*2300mm

Machine weight: about 850KG

Replacement specifications: about 30 min

examination range:

Length: 10-60mm Diameter: 10-30mm

The fastest speed:20 pcs / min

Crack detection accuracy: depth >0.1mm width 0.06mm

Power: AC single 220V 50HZ

Power: about 3KW

可檢測項目

Suitable for

表面劃傷、淬火開裂檢測(渦流檢測)

○螺紋直徑公差檢測；○最大/最小對邊公差檢測；

○螺紋牙底徑檢測；○螺紋牙中徑檢測；○牙距檢測；

○有無螺紋檢測；○斜牙檢測；○粗細牙檢測；

○頭部有無電鍍檢測；○頭部真圓度測量；○內孔直徑公差；

○搓牙有無到位檢測；○各部位臺階公差檢測；

○頭部厚度公差檢測；○總長度公差檢測；○側面開裂檢測；

Surface scratch and quenching cracking detection (Eddy current detection)

○Thread diameter tolerance detection;○ Maximum / minimum alignment tolerance detection;

○Threaded teeth bottom diameter detection;○ Thread middle diameter detection; Distance detection between teeth;

○Thread or not; ○Oblique teeth detection; ○Teeth thickness detection;

○Electroplating on head or not;○ Head roundness measurement; ○Diameter tolerance of inner hole;

○Detection for rub teeth in place or not;○ Step tolerance detection of each part;

○Head thickness tolerance detection;

○ Total length tolerance detection; Side cracking detection;

本設備用于檢測高端螺栓外觀尺寸、渦流表面探傷組合篩選機。

本機采用德國原裝進口Ibg渦流主機

This equipment is used to detect the appearance size of high-end bolt, vortex surface flaw detection combination screening machine.

This machine adopts imported Ibg eddy current main engine from Germany.