HL-05-U07A
雙通道渦電流探傷光學影像組合篩選機
Optical image combined screening machine for dual-channel eddy current detection
參數規格
Specifications
裂紋檢測精度：深度＞0.1mm 寬度0.06mm
Crack detection accuracy: depth＞0.1mm width 0.06mm
參數規格
Specifications
本機臺外觀尺寸(長*寬*高)：
約2000mm*1800mm*2200mm
機臺重量：約950KG
更換規格：約20分鐘
檢測范圍：
長度:30-80mm 直徑;10-80mm
速度最快可達50支/分鐘
裂紋檢測精度：深度＞0.1mm 寬度0.06mm
采用德國渦流主機
電源：交流單項220V 50HZ
功率：約6KW
Product Size(L x W x H):
About 2000mm*1800mm*2200mm
Machine weight: about 950KG
Replacement specification: about 20 min
examination range:
Length: 30-80mm diameter; 10-80mm
The fastest speed:50 / min
Crack detection accuracy: depth >0.1mm width 0.06mm
German eddy current host
Power: AC single 220V 50HZ
Power: about 6KW
可檢測項目
Suitable for
表面劃傷、淬火開裂檢測(渦流檢測)
○螺紋直徑公差檢測；○最大/最小對邊公差檢測；
○螺紋牙底徑檢測；○螺紋牙中徑檢測；○牙距檢測；
○有無螺紋檢測；○斜牙檢測；○粗細牙檢測；
○頭部有無電鍍檢測；○頭部真圓度測量；○內孔直徑公差；
○搓牙有無到位檢測；○各部位臺階公差檢測；
○頭部厚度公差檢測；○總長度公差檢測；○側面開裂檢測；
Surface scratching, quenching crack detection (eddy current testing)
○Thread diameter tolerance detection;○ Maximum / minimum alignment tolerance detection;○Threaded teeth bottom diameter detection; ○Threaded teeth median diameter detection; ○Distance detection between teeth;
○Thread or not; ○Oblique teeth detection;○ Teeth thickness detection;
○Electroplating detection or not on head; ○Head roundness measurement; ○Diameter tolerance of inner hole;○Detection for rub teeth in place or not;○ Step tolerance detection of each part;○Head thickness tolerance detection; ○Total length tolerance detection; Side cracking detection;
